Block Paving on sloping riverside ground above the Hamble — the kind found across Bursledon — means individual concrete or clay blocks laid on a compacted sub-base and locked together with a firm edge restraint. Locally, the driveway most often needed is one dealing with steep, sometimes stepped drives needing serious run-off control. It is best suited to estate-standard frontages and anywhere individual-section repairability matters, though the edge restraint’s condition matters as much as the blocks themselves. There is also the sloping Hamble riverside setting, where run-off control is a genuine build consideration to plan around.
About Block Paving
Block paving is built from individual concrete or clay block units, each laid by hand into a bed of sharp sand over a properly compacted sub-base, in a pattern such as herringbone, basketweave or stalled stretcher bond, then vibrated in and jointed with kiln-dried sand. A firm edge restraint around the perimeter is what keeps the whole surface locked together under vehicle loading, so its condition matters as much as the blocks themselves. Because it is made of individual units, block paving can be lifted section by section for repairs or access to services below and re-laid, which is a genuine practical advantage over a single continuous surface. Joints do need periodic re-sanding, and block paving was the standard original specification on a great deal of estate housing built from the 1970s onward.
Best suited to: estate-standard driveways, properties wanting a specific pattern or colour, and anywhere repairability of individual sections matters
Less suited to: a fully seamless look with zero visible joints
Ground & property in Bursledon
Bursledon’s riverside plots above the Hamble are genuinely sloping, and a fair number of driveways here are stepped rather than a single flat run. Falls, edge restraint and run-off control matter more on ground like this than almost anywhere else in the catchment, simply because of how steep some of these plots are.
Coastal / flood note: Hamble riverside run-off control